RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

DH8TOM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH8TOM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RX10m*	RX1h*	Eff1h*	Temp*
1736433576	24 Pkt	430 Pkt	99 Pcnt	17.28 Grad
1736433275	23 Pkt	410 Pkt	99 Pcnt	17.28 Grad
1736432975	24 Pkt	420 Pkt	98 Pcnt	17.28 Grad
1736432675	24 Pkt	430 Pkt	97 Pcnt	17.28 Grad
1736432375	24 Pkt	420 Pkt	97 Pcnt	17.28 Grad
1736432074	23 Pkt	370 Pkt	97 Pcnt	17.28 Grad
1736431774	23 Pkt	370 Pkt	97 Pcnt	17.28 Grad
1736431474	23 Pkt	320 Pkt	97 Pcnt	17.28 Grad
1736431173	22 Pkt	290 Pkt	97 Pcnt	17.28 Grad
1736430873	22 Pkt	340 Pkt	97 Pcnt	17.28 Grad
1736430573	22 Pkt	460 Pkt	97 Pcnt	17.28 Grad
1736430275	22 Pkt	520 Pkt	97 Pcnt	17.28 Grad
1736429972	21 Pkt	520 Pkt	98 Pcnt	17.28 Grad
1736429672	20 Pkt	460 Pkt	98 Pcnt	17.28 Grad
1736429372	19 Pkt	360 Pkt	99 Pcnt	17.28 Grad
1736429072	19 Pkt	350 Pkt	100 Pcnt	17.28 Grad
1736428771	19 Pkt	310 Pkt	100 Pcnt	17.28 Grad
1736428471	19 Pkt	300 Pkt	100 Pcnt	17.28 Grad
1736428171	18 Pkt	280 Pkt	100 Pcnt	17.28 Grad
1736427870	19 Pkt	310 Pkt	100 Pcnt	17.28 Grad
1736427570	18 Pkt	310 Pkt	100 Pcnt	17.28 Grad
1736427270	19 Pkt	330 Pkt	100 Pcnt	17.28 Grad
1736426970	20 Pkt	360 Pkt	100 Pcnt	17.28 Grad
1736426669	19 Pkt	290 Pkt	100 Pcnt	17.28 Grad
1736426369	19 Pkt	270 Pkt	100 Pcnt	17.28 Grad

*Used Equation Coefficients:

RX10m: 0, 1, 0

RX1h: 0, 10, 0

Eff1h: 0, 1, 0

Vin: 0, 0.101, 0

Temp: 0, 0.135, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)