RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

MKSRDG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object MKSRDG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734939184	13.88 Volt	810 Pkt	40 Pkt	88 Pcnt
1734938284	13.88 Volt	850 Pkt	40 Pkt	89 Pcnt
1734937392	13.88 Volt	860 Pkt	50 Pkt	89 Pcnt
1734937384	13.88 Volt	860 Pkt	50 Pkt	89 Pcnt
1734936484	13.88 Volt	870 Pkt	50 Pkt	89 Pcnt
1734930191	13.88 Volt	750 Pkt	40 Pkt	90 Pcnt
1734930184	13.88 Volt	750 Pkt	40 Pkt	90 Pcnt
1734929284	13.88 Volt	770 Pkt	40 Pkt	89 Pcnt
1734928391	13.88 Volt	770 Pkt	40 Pkt	90 Pcnt
1734928384	13.88 Volt	770 Pkt	40 Pkt	90 Pcnt
1734927484	13.88 Volt	770 Pkt	40 Pkt	90 Pcnt
1734926591	13.88 Volt	780 Pkt	40 Pkt	92 Pcnt
1734926584	13.88 Volt	780 Pkt	40 Pkt	92 Pcnt
1734925684	13.88 Volt	790 Pkt	40 Pkt	92 Pcnt
1734924785	13.88 Volt	810 Pkt	40 Pkt	92 Pcnt
1734924784	13.88 Volt	810 Pkt	40 Pkt	92 Pcnt
1734923884	13.88 Volt	830 Pkt	40 Pkt	91 Pcnt
1734922992	13.88 Volt	860 Pkt	40 Pkt	91 Pcnt
1734922984	13.88 Volt	860 Pkt	40 Pkt	91 Pcnt
1734922084	13.88 Volt	880 Pkt	40 Pkt	92 Pcnt
1734921189	13.88 Volt	890 Pkt	40 Pkt	91 Pcnt
1734921184	13.88 Volt	890 Pkt	40 Pkt	91 Pcnt
1734920284	13.88 Volt	900 Pkt	40 Pkt	91 Pcnt
1734919392	13.88 Volt	880 Pkt	50 Pkt	91 Pcnt
1734919384	13.88 Volt	880 Pkt	50 Pkt	91 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)