RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HP1GRE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1GRE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RSSI*	Voltage*
1734970977	36 Pkt	-15 dBm	13.84 V
1734969750	29 Pkt	-15 dBm	13.84 V
1734968523	5 Pkt	-15 dBm	13.84 V
1734967232	29 Pkt	-13 dBm	13.84 V
1734966004	26 Pkt	-13 dBm	13.82 V
1734964775	32 Pkt	-15 dBm	13.82 V
1734963546	28 Pkt	-13 dBm	13.82 V
1734962319	26 Pkt	-14 dBm	13.84 V
1734961091	27 Pkt	-14 dBm	13.84 V
1734959864	23 Pkt	-14 dBm	13.84 V
1734958636	23 Pkt	-14 dBm	13.82 V
1734957409	29 Pkt	-13 dBm	13.84 V
1734956181	26 Pkt	-13 dBm	13.84 V
1734954954	31 Pkt	-14 dBm	13.84 V
1734953726	23 Pkt	-13 dBm	13.84 V
1734952498	26 Pkt	-14 dBm	13.84 V
1734951271	23 Pkt	-12 dBm	13.84 V
1734950043	25 Pkt	-13 dBm	13.84 V
1734948816	38 Pkt	-14 dBm	13.84 V
1734947587	27 Pkt	-13 dBm	13.84 V
1734946360	27 Pkt	-13 dBm	13.84 V
1734945133	28 Pkt	-14 dBm	13.84 V
1734943905	31 Pkt	-13 dBm	13.82 V
1734942677	32 Pkt	-13 dBm	13.82 V
1734941449	24 Pkt	-13 dBm	13.7 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)