RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SMITH Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SMITH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1736922860	12.52 Volt	310 Pkt	150 Pkt	68 Pcnt
1736922560	12.52 Volt	310 Pkt	150 Pkt	69 Pcnt
1736922259	12.52 Volt	310 Pkt	140 Pkt	68 Pcnt
1736921959	12.52 Volt	310 Pkt	140 Pkt	67 Pcnt
1736921659	12.52 Volt	310 Pkt	130 Pkt	65 Pcnt
1736921359	12.52 Volt	310 Pkt	130 Pkt	64 Pcnt
1736921058	12.52 Volt	300 Pkt	130 Pkt	64 Pcnt
1736920758	12.52 Volt	300 Pkt	120 Pkt	63 Pcnt
1736920458	12.52 Volt	290 Pkt	110 Pkt	62 Pcnt
1736920157	12.52 Volt	280 Pkt	110 Pkt	60 Pcnt
1736919857	12.52 Volt	280 Pkt	100 Pkt	59 Pcnt
1736919557	12.52 Volt	270 Pkt	100 Pkt	58 Pcnt
1736919257	12.52 Volt	280 Pkt	100 Pkt	59 Pcnt
1736918956	12.52 Volt	280 Pkt	100 Pkt	58 Pcnt
1736918656	12.52 Volt	280 Pkt	100 Pkt	58 Pcnt
1736918356	12.52 Volt	280 Pkt	100 Pkt	58 Pcnt
1736918055	12.52 Volt	270 Pkt	110 Pkt	59 Pcnt
1736917755	12.52 Volt	270 Pkt	110 Pkt	59 Pcnt
1736917455	12.52 Volt	270 Pkt	100 Pkt	58 Pcnt
1736917155	12.52 Volt	270 Pkt	100 Pkt	58 Pcnt
1736916854	12.52 Volt	270 Pkt	110 Pkt	59 Pcnt
1736916554	12.52 Volt	270 Pkt	110 Pkt	59 Pcnt
1736916254	12.52 Volt	260 Pkt	110 Pkt	60 Pcnt
1736915953	12.52 Volt	260 Pkt	110 Pkt	60 Pcnt
1736915653	12.52 Volt	260 Pkt	110 Pkt	59 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.0728, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)