This is the latest recevied telemetry packets stored in our database for station/object BM2OBM-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | CPUTemp* | RxPkts/10m* | RxPkts/1h* | RxPkts/24h* | DiGi* |
---|---|---|---|---|---|
1730424378 | 33 C | 36 p | 68 p | 723 p | 9 p |
1730422029 | 39 C | 5 p | 44 p | 708 p | 33 p |
1730420829 | 39 C | 8 p | 40 p | 695 p | 28 p |
1730419629 | 39 C | 5 p | 35 p | 679 p | 21 p |
1730418428 | 39 C | 3 p | 28 p | 664 p | 14 p |
1730417229 | 39 C | 5 p | 27 p | 655 p | 9 p |
1730416028 | 39 C | 2 p | 35 p | 644 p | 6 p |
1730414828 | 39 C | 4 p | 36 p | 636 p | 4 p |
1730413629 | 39 C | 12 p | 40 p | 628 p | 1 p |
1730413260 | 39 C | 4 p | 32 p | 620 p | 29 p |
1730412059 | 40 C | 3 p | 30 p | 609 p | 27 p |
1730410860 | 38 C | 4 p | 31 p | 600 p | 25 p |
1730409659 | 39 C | 2 p | 27 p | 588 p | 22 p |
1730408460 | 39 C | 4 p | 27 p | 579 p | 20 p |
1730407259 | 39 C | 4 p | 25 p | 569 p | 17 p |
1730406060 | 39 C | 5 p | 26 p | 561 p | 14 p |
1730404860 | 39 C | 3 p | 26 p | 552 p | 12 p |
1730403660 | 39 C | 3 p | 26 p | 544 p | 9 p |
1730402460 | 38 C | 4 p | 33 p | 535 p | 7 p |
1730401260 | 38 C | 2 p | 37 p | 526 p | 5 p |
1730400060 | 38 C | 6 p | 43 p | 518 p | 3 p |
1730398860 | 37 C | 16 p | 47 p | 509 p | 0 p |
1730397349 | 37 C | 5 p | 36 p | 498 p | 6 p |
1730396149 | 36 C | 5 p | 41 p | 489 p | 5 p |
1730394948 | 37 C | 9 p | 38 p | 477 p | 2 p |
*Used Equation Coefficients:
CPUTemp: 0, 1, 0
RxPkts/10m: 0, 1, 0
RxPkts/1h: 0, 1, 0
RxPkts/24h: 0, 1, 0
DiGi: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)