RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BALD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BALD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1730418555	11.93 Volt	260 Pkt	70 Pkt	80 Pcnt
1730418555	11.93 Volt	260 Pkt	70 Pkt	80 Pcnt
1730417955	11.93 Volt	280 Pkt	70 Pkt	82 Pcnt
1730417955	11.93 Volt	280 Pkt	70 Pkt	82 Pcnt
1730417355	11.93 Volt	290 Pkt	80 Pkt	82 Pcnt
1730417355	11.93 Volt	290 Pkt	80 Pkt	82 Pcnt
1730416755	11.93 Volt	300 Pkt	80 Pkt	81 Pcnt
1730416755	11.93 Volt	300 Pkt	80 Pkt	81 Pcnt
1730416155	11.93 Volt	290 Pkt	80 Pkt	80 Pcnt
1730416155	11.93 Volt	290 Pkt	80 Pkt	80 Pcnt
1730415555	11.93 Volt	290 Pkt	80 Pkt	79 Pcnt
1730415555	11.93 Volt	290 Pkt	80 Pkt	79 Pcnt
1730414955	11.93 Volt	280 Pkt	90 Pkt	79 Pcnt
1730414955	11.93 Volt	280 Pkt	90 Pkt	79 Pcnt
1730414356	11.93 Volt	270 Pkt	80 Pkt	77 Pcnt
1730414355	11.93 Volt	270 Pkt	80 Pkt	77 Pcnt
1730413756	11.93 Volt	260 Pkt	70 Pkt	76 Pcnt
1730413755	11.93 Volt	260 Pkt	70 Pkt	76 Pcnt
1730413155	11.93 Volt	260 Pkt	80 Pkt	76 Pcnt
1730413155	11.93 Volt	260 Pkt	80 Pkt	76 Pcnt
1730412556	11.93 Volt	250 Pkt	70 Pkt	76 Pcnt
1730412555	11.93 Volt	250 Pkt	70 Pkt	76 Pcnt
1730411956	11.3 Volt	240 Pkt	70 Pkt	76 Pcnt
1730411955	11.3 Volt	240 Pkt	70 Pkt	76 Pcnt
1730411356	11.93 Volt	240 Pkt	70 Pkt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)