RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IW2HUZ-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW2HUZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Dg1h*	Eff1h*
1734965607	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734965307	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734965006	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734964706	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734964406	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734964106	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734963806	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734963505	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734963205	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734962904	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734962604	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734962304	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734962004	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734961703	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734961403	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734961103	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734960802	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734960502	0 Pkt	0 Pkt	0 Pkt	0 Pkt	100 Pcnt
1734960202	0 Pkt	0 Pkt	0 Pkt	0 Pkt	100 Pcnt
1734959902	0 Pkt	0 Pkt	0 Pkt	0 Pkt	100 Pcnt
1734959601	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734959301	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734959001	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734958701	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt
1734958400	0 Pkt	0 Pkt	0 Pkt	0 Pkt	0 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)