RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS5AU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5AU. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	Temp*	VIN*
1734916948	3 Pkt	2 Pkt	34.2 C	13.09 V
1734916353	4 Pkt	3 Pkt	33.3 C	13.29 V
1734915757	3 Pkt	3 Pkt	33.3 C	12.83 V
1734915163	0 Pkt	4 Pkt	32.5 C	12.53 V
1734914568	0 Pkt	0 Pkt	32.5 C	12.79 V
1734913974	0 Pkt	1 Pkt	32.5 C	13.02 V
1734913380	1 Pkt	0 Pkt	31.7 C	12.81 V
1734912785	0 Pkt	0 Pkt	31.7 C	12.3 V
1734912191	2 Pkt	1 Pkt	31.7 C	12.07 V
1734911596	0 Pkt	4 Pkt	31.7 C	11.89 V
1734911002	1 Pkt	0 Pkt	31.7 C	11.96 V
1734910408	2 Pkt	1 Pkt	31.7 C	11.98 V
1734909812	2 Pkt	0 Pkt	32.5 C	11.61 V
1734909217	2 Pkt	0 Pkt	32.5 C	11.98 V
1734908623	0 Pkt	1 Pkt	32.5 C	11.96 V
1734908028	1 Pkt	4 Pkt	32.5 C	11.96 V
1734907434	0 Pkt	0 Pkt	32.5 C	12 V
1734906839	0 Pkt	1 Pkt	32.5 C	11.96 V
1734906245	1 Pkt	0 Pkt	32.5 C	12 V
1734905651	1 Pkt	0 Pkt	32.5 C	11.98 V
1734905056	0 Pkt	1 Pkt	32.5 C	11.96 V
1734904462	0 Pkt	4 Pkt	32.5 C	12 V
1734903868	0 Pkt	0 Pkt	32.5 C	11.98 V
1734903273	2 Pkt	1 Pkt	32.5 C	11.98 V
1734902679	2 Pkt	0 Pkt	32.5 C	12 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

Temp: 0, 1, 0

GPS: 0, 1, 0

VIN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)