This is the latest recevied telemetry packets stored in our database for station/object KC9YTT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718485669 | 255 | 59 | 37 | 40 | 38 |
1718484468 | 255 | 59 | 37 | 40 | 38 |
1718483267 | 255 | 58 | 36 | 40 | 37 |
1718482065 | 255 | 58 | 37 | 40 | 38 |
1718478462 | 255 | 59 | 37 | 41 | 39 |
1718476059 | 255 | 59 | 37 | 41 | 38 |
1718472456 | 255 | 58 | 36 | 42 | 37 |
1718471253 | 255 | 58 | 37 | 40 | 39 |
1718470052 | 255 | 58 | 36 | 40 | 37 |
1718468851 | 255 | 58 | 36 | 40 | 38 |
1718467650 | 255 | 58 | 36 | 40 | 38 |
1718466449 | 255 | 58 | 36 | 40 | 37 |
1718464046 | 255 | 59 | 37 | 41 | 39 |
1718462845 | 255 | 59 | 37 | 40 | 38 |
1718461644 | 255 | 59 | 37 | 41 | 38 |
1718459241 | 255 | 60 | 38 | 42 | 40 |
1718454432 | 255 | 61 | 40 | 43 | 42 |
1718453230 | 255 | 61 | 39 | 42 | 40 |
1718452029 | 255 | 61 | 39 | 43 | 40 |
1718450828 | 255 | 61 | 39 | 42 | 40 |
1718449627 | 255 | 61 | 39 | 42 | 40 |
1718448425 | 255 | 61 | 39 | 42 | 40 |
1718447224 | 255 | 61 | 39 | 42 | 40 |
1718446017 | 255 | 61 | 39 | 42 | 41 |
1718444816 | 255 | 61 | 39 | 42 | 41 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)