This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Sate* | Temp* | Volt* | Alt* | A5* |
---|---|---|---|---|---|
1719652420 | 4 | 13.5 C | 4.24 V | 500 M | 0 |
1719651988 | 4 | 13 C | 4.24 V | 550 M | 0 |
1719648726 | 0 | 13.6 C | 4.23 V | 560 M | 0 |
1719645732 | 4 | 13.8 C | 4.23 V | 500 M | 0 |
1719643409 | 5 | 14 C | 4.23 V | 490 M | 0 |
1719640975 | 6 | 14.5 C | 4.24 V | 520 M | 0 |
1719638244 | 6 | 15 C | 4.23 V | 540 M | 0 |
1719635370 | 4 | 15.7 C | 4.23 V | 540 M | 0 |
1719632397 | 6 | 16.6 C | 4.24 V | 540 M | 0 |
1719630284 | 5 | 17.3 C | 4.23 V | 560 M | 0 |
1719627352 | 6 | 18.4 C | 4.23 V | 520 M | 0 |
1719625138 | 6 | 19.4 C | 4.23 V | 540 M | 0 |
1719622495 | 6 | 20.7 C | 4.23 V | 510 M | 0 |
1719619827 | 6 | 22.5 C | 4.23 V | 520 M | 0 |
1719617364 | 6 | 24.2 C | 4.23 V | 530 M | 0 |
1719614452 | 5 | 26.9 C | 4.22 V | 560 M | 0 |
1719611466 | 7 | 30.8 C | 4.22 V | 520 M | 0 |
1719608466 | 3 | 35.4 C | 4.22 V | 490 M | 0 |
1719605577 | 6 | 37.2 C | 4.22 V | 520 M | 0 |
1719602577 | 7 | 33.1 C | 4.2 V | 510 M | 0 |
1719601474 | 8 | 33.1 C | 4.22 V | 490 M | 0 |
1719601151 | 8 | 32.6 C | 4.22 V | 510 M | 0 |
1719600752 | 6 | 32.1 C | 4.22 V | 540 M | 0 |
1719599254 | 6 | 28.3 C | 4.23 V | 540 M | 0 |
1719598494 | 7 | 28.7 C | 4.22 V | 530 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)