This is the latest recevied telemetry packets stored in our database for station/object F5ZEE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | PA Temp* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716782944 | 20.38 deg.C | 0 | 0 | 0 | 0 |
1716782645 | 20.38 deg.C | 0 | 0 | 0 | 0 |
1716782344 | 20.38 deg.C | 0 | 0 | 0 | 0 |
1716782044 | 20.38 deg.C | 0 | 0 | 0 | 0 |
1716781743 | 20.54 deg.C | 0 | 0 | 0 | 0 |
1716781444 | 20.54 deg.C | 0 | 0 | 0 | 0 |
1716781143 | 20.54 deg.C | 0 | 0 | 0 | 0 |
1716780844 | 20.54 deg.C | 0 | 0 | 0 | 0 |
1716780543 | 20.7 deg.C | 0 | 0 | 0 | 0 |
1716780244 | 20.7 deg.C | 0 | 0 | 0 | 0 |
1716779944 | 20.7 deg.C | 0 | 0 | 0 | 0 |
1716779644 | 20.7 deg.C | 0 | 0 | 0 | 0 |
1716779344 | 20.7 deg.C | 0 | 0 | 0 | 0 |
1716779044 | 20.7 deg.C | 0 | 0 | 0 | 0 |
1716778744 | 20.7 deg.C | 0 | 0 | 0 | 0 |
1716778444 | 20.7 deg.C | 0 | 0 | 0 | 0 |
1716778144 | 20.7 deg.C | 0 | 0 | 0 | 0 |
1716777844 | 20.86 deg.C | 0 | 0 | 0 | 0 |
1716777544 | 20.86 deg.C | 0 | 0 | 0 | 0 |
1716777244 | 20.86 deg.C | 0 | 0 | 0 | 0 |
1716776944 | 20.86 deg.C | 0 | 0 | 0 | 0 |
1716776644 | 20.86 deg.C | 0 | 0 | 0 | 0 |
1716776344 | 20.86 deg.C | 0 | 0 | 0 | 0 |
1716776044 | 20.86 deg.C | 0 | 0 | 0 | 0 |
1716775745 | 20.86 deg.C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
PA Temp: 0, 0.16016, -40
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)