RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK5RWR-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RWR-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1734953247	12.05 Volt	60 Pkt	46 Pcnt	19.5 C
1734952347	12.05 Volt	70 Pkt	52 Pcnt	20 C
1734951447	12.05 Volt	110 Pkt	66 Pcnt	20 C
1734950547	12.05 Volt	140 Pkt	72 Pcnt	20.5 C
1734949647	12.05 Volt	180 Pkt	77 Pcnt	20.5 C
1734948748	12.12 Volt	190 Pkt	80 Pcnt	21 C
1734947848	12.12 Volt	180 Pkt	81 Pcnt	22 C
1734946948	12.05 Volt	170 Pkt	79 Pcnt	22.5 C
1734946048	12.12 Volt	150 Pkt	77 Pcnt	23 C
1734945148	12.19 Volt	130 Pkt	71 Pcnt	24 C
1734944248	12.19 Volt	120 Pkt	69 Pcnt	25 C
1734943348	12.19 Volt	100 Pkt	59 Pcnt	26 C
1734942448	12.19 Volt	90 Pkt	55 Pcnt	27 C
1734941548	12.19 Volt	70 Pkt	44 Pcnt	28 C
1734940648	13.65 Volt	70 Pkt	43 Pcnt	28.5 C
1734939748	13.72 Volt	70 Pkt	38 Pcnt	29 C
1734938848	12.12 Volt	80 Pkt	36 Pcnt	29.5 C
1734937948	14.16 Volt	70 Pkt	32 Pcnt	29.5 C
1734937048	12.12 Volt	70 Pkt	30 Pcnt	29.5 C
1734936148	14.67 Volt	70 Pkt	32 Pcnt	30 C
1734929848	13.8 Volt	60 Pkt	30 Pcnt	31.5 C
1734928948	13.8 Volt	60 Pkt	30 Pcnt	31 C
1734928048	13.8 Volt	60 Pkt	31 Pcnt	31 C
1734927148	13.8 Volt	60 Pkt	32 Pcnt	31.5 C
1734926248	13.8 Volt	60 Pkt	30 Pcnt	31 C

*Used Equation Coefficients:

Vin: 0, 0.073, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)