This is the latest recevied telemetry packets stored in our database for station/object KD8NJV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 03/18/2025 12:10:18 AM+00:00 | 418 | 616 | 0 | 0 | 0 |
| 03/18/2025 12:05:17 AM+00:00 | 472 | 617 | 0 | 0 | 0 |
| 03/17/2025 11:55:19 PM+00:00 | 400 | 616 | 0 | 0 | 0 |
| 03/17/2025 11:50:22 PM+00:00 | 417 | 617 | 0 | 0 | 0 |
| 03/17/2025 11:15:26 PM+00:00 | 418 | 619 | 0 | 0 | 0 |
| 03/17/2025 11:10:26 PM+00:00 | 417 | 620 | 0 | 0 | 0 |
| 03/17/2025 11:05:27 PM+00:00 | 418 | 620 | 0 | 0 | 0 |
| 03/17/2025 11:00:28 PM+00:00 | 418 | 620 | 0 | 0 | 0 |
| 03/17/2025 10:55:29 PM+00:00 | 419 | 620 | 0 | 0 | 0 |
| 03/17/2025 10:50:30 PM+00:00 | 419 | 620 | 0 | 0 | 0 |
| 03/17/2025 10:35:32 PM+00:00 | 419 | 620 | 0 | 0 | 0 |
| 03/17/2025 10:30:32 PM+00:00 | 419 | 620 | 0 | 0 | 0 |
| 03/17/2025 10:20:33 PM+00:00 | 420 | 619 | 0 | 0 | 0 |
| 03/17/2025 10:15:34 PM+00:00 | 420 | 619 | 0 | 0 | 0 |
| 03/17/2025 10:05:35 PM+00:00 | 420 | 619 | 0 | 0 | 0 |
| 03/17/2025 10:00:36 PM+00:00 | 473 | 620 | 0 | 0 | 0 |
| 03/17/2025 9:45:38 PM+00:00 | 475 | 618 | 0 | 0 | 0 |
| 03/17/2025 9:40:38 PM+00:00 | 417 | 618 | 0 | 0 | 0 |
| 03/17/2025 9:30:40 PM+00:00 | 417 | 618 | 0 | 0 | 0 |
| 03/17/2025 9:25:41 PM+00:00 | 417 | 618 | 0 | 0 | 0 |
| 03/17/2025 9:20:41 PM+00:00 | 418 | 618 | 0 | 0 | 0 |
| 03/17/2025 8:55:45 PM+00:00 | 418 | 618 | 0 | 0 | 0 |
| 03/17/2025 8:45:47 PM+00:00 | 419 | 618 | 0 | 0 | 0 |
| 03/17/2025 8:35:48 PM+00:00 | 419 | 617 | 0 | 0 | 0 |
| 03/17/2025 8:25:50 PM+00:00 | 419 | 617 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)