This is the latest recevied telemetry packets stored in our database for station/object OH7LZB-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734958626 | 2719 | 2389 | 2538 | 0 | 0 |
| 1734957821 | 2719 | 2386 | 2538 | 0 | 0 |
| 1734957076 | 2716 | 2386 | 2535 | 0 | 0 |
| 1734956301 | 2716 | 2383 | 2535 | 0 | 0 |
| 1734955504 | 2714 | 2383 | 2535 | 0 | 0 |
| 1734954741 | 2714 | 2383 | 2541 | 0 | 0 |
| 1734953891 | 2711 | 2380 | 2538 | 0 | 0 |
| 1734953096 | 2708 | 2380 | 2541 | 0 | 0 |
| 1734952217 | 2708 | 2374 | 2538 | 0 | 0 |
| 1734951416 | 2705 | 2374 | 2538 | 0 | 0 |
| 1734950521 | 2705 | 2371 | 2538 | 0 | 0 |
| 1734949791 | 2702 | 2371 | 2541 | 0 | 0 |
| 1734948968 | 2702 | 2371 | 2541 | 0 | 0 |
| 1734948158 | 2699 | 2369 | 2538 | 0 | 0 |
| 1734947381 | 2696 | 2366 | 2538 | 0 | 0 |
| 1734946571 | 2693 | 2363 | 2538 | 0 | 0 |
| 1734945681 | 2693 | 2363 | 2532 | 0 | 0 |
| 1734944946 | 2691 | 2363 | 2530 | 0 | 0 |
| 1734944126 | 2691 | 2360 | 2530 | 0 | 0 |
| 1734943356 | 2688 | 2360 | 2521 | 0 | 0 |
| 1734942628 | 2688 | 2357 | 2530 | 0 | 0 |
| 1734941846 | 2685 | 2354 | 2527 | 0 | 0 |
| 1734940965 | 2682 | 2354 | 2524 | 0 | 0 |
| 1734940131 | 2682 | 2351 | 2527 | 0 | 0 |
| 1734939306 | 2679 | 2351 | 2515 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)