This is the latest recevied telemetry packets stored in our database for station/object KE9YM-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718063549 | 534 | 471 | 465 | 0 | 536 |
1718062586 | 534 | 470 | 465 | 0 | 539 |
1718061624 | 534 | 471 | 465 | 0 | 541 |
1718060662 | 534 | 469 | 466 | 0 | 538 |
1718059700 | 535 | 470 | 465 | 0 | 539 |
1718059219 | 534 | 471 | 465 | 0 | 538 |
1718058738 | 534 | 471 | 466 | 0 | 538 |
1718057775 | 534 | 471 | 466 | 0 | 536 |
1718057294 | 534 | 470 | 465 | 0 | 536 |
1718056331 | 534 | 470 | 465 | 0 | 538 |
1718055851 | 534 | 469 | 465 | 0 | 536 |
1718055369 | 534 | 470 | 465 | 0 | 539 |
1718054889 | 534 | 471 | 466 | 0 | 535 |
1718054406 | 534 | 471 | 465 | 0 | 540 |
1718053925 | 534 | 470 | 465 | 0 | 534 |
1718053444 | 534 | 471 | 465 | 0 | 534 |
1718052000 | 534 | 471 | 466 | 0 | 538 |
1718051519 | 534 | 471 | 465 | 0 | 539 |
1718051038 | 534 | 470 | 465 | 0 | 535 |
1718050076 | 535 | 469 | 465 | 0 | 535 |
1718049594 | 534 | 470 | 465 | 0 | 538 |
1718049113 | 534 | 471 | 466 | 0 | 539 |
1718048150 | 534 | 471 | 465 | 0 | 535 |
1718047670 | 534 | 471 | 466 | 0 | 539 |
1718047189 | 534 | 470 | 465 | 0 | 539 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)