This is the latest recevied telemetry packets stored in our database for station/object LOKOUT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719901221 | 138 | 168 | 255 | 40 | 18 |
1719897617 | 141 | 168 | 255 | 39 | 17 |
1719894013 | 141 | 167 | 255 | 40 | 19 |
1719890408 | 141 | 167 | 255 | 41 | 19 |
1719879594 | 141 | 169 | 255 | 37 | 14 |
1719875989 | 141 | 170 | 255 | 36 | 12 |
1719872385 | 141 | 170 | 255 | 36 | 13 |
1719857965 | 141 | 167 | 255 | 40 | 20 |
1719854355 | 141 | 168 | 255 | 39 | 17 |
1719850752 | 141 | 168 | 255 | 38 | 17 |
1719847147 | 141 | 168 | 255 | 38 | 17 |
1719843542 | 141 | 168 | 255 | 40 | 18 |
1719839937 | 141 | 167 | 255 | 41 | 19 |
1719832726 | 141 | 168 | 255 | 40 | 18 |
1719829121 | 141 | 167 | 255 | 45 | 25 |
1719825848 | 141 | 168 | 255 | 40 | 18 |
1719822244 | 141 | 168 | 255 | 40 | 18 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)