This is the latest recevied telemetry packets stored in our database for station/object HP2PCO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1719817311 | 12.38 Volt | 170 Pkt | 70 Pkt | 90 Pcnt | 0 None |
1719816710 | 12.38 Volt | 170 Pkt | 70 Pkt | 90 Pcnt | 0 None |
1719816110 | 12.38 Volt | 160 Pkt | 60 Pkt | 89 Pcnt | 0 None |
1719815509 | 12.38 Volt | 160 Pkt | 70 Pkt | 88 Pcnt | 0 None |
1719814909 | 12.38 Volt | 150 Pkt | 70 Pkt | 88 Pcnt | 0 None |
1719814308 | 12.38 Volt | 150 Pkt | 70 Pkt | 90 Pcnt | 0 None |
1719813707 | 12.38 Volt | 160 Pkt | 60 Pkt | 89 Pcnt | 0 None |
1719812506 | 12.38 Volt | 160 Pkt | 60 Pkt | 88 Pcnt | 0 None |
1719811906 | 12.38 Volt | 180 Pkt | 60 Pkt | 91 Pcnt | 0 None |
1719811305 | 12.38 Volt | 180 Pkt | 60 Pkt | 88 Pcnt | 0 None |
1719810705 | 12.38 Volt | 170 Pkt | 60 Pkt | 86 Pcnt | 0 None |
1719810105 | 12.38 Volt | 170 Pkt | 70 Pkt | 84 Pcnt | 0 None |
1719809504 | 12.38 Volt | 170 Pkt | 70 Pkt | 86 Pcnt | 0 None |
1719808904 | 12.38 Volt | 160 Pkt | 70 Pkt | 85 Pcnt | 0 None |
1719808303 | 12.3 Volt | 160 Pkt | 60 Pkt | 84 Pcnt | 0 None |
1719807704 | 12.38 Volt | 170 Pkt | 70 Pkt | 86 Pcnt | 0 None |
1719806501 | 12.3 Volt | 190 Pkt | 60 Pkt | 89 Pcnt | 0 None |
1719805901 | 12.3 Volt | 190 Pkt | 60 Pkt | 89 Pcnt | 0 None |
1719804701 | 12.38 Volt | 200 Pkt | 60 Pkt | 92 Pcnt | 0 None |
1719804098 | 12.38 Volt | 190 Pkt | 60 Pkt | 92 Pcnt | 0 None |
1719803498 | 12.38 Volt | 190 Pkt | 60 Pkt | 94 Pcnt | 0 None |
1719802297 | 12.38 Volt | 180 Pkt | 70 Pkt | 95 Pcnt | 0 None |
1719801696 | 12.38 Volt | 180 Pkt | 70 Pkt | 94 Pcnt | 0 None |
1719801095 | 12.38 Volt | 180 Pkt | 70 Pkt | 93 Pcnt | 0 None |
1719800495 | 12.38 Volt | 180 Pkt | 70 Pkt | 91 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)