RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK2RBE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RBE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Battery*	Core*	Room*	Battery*
1734878852	12.8 VDC	49.9 degC	26.6 degC	27 degC
1734875253	12.8 VDC	51 degC	27.3 degC	27.8 degC
1734871656	12.8 VDC	51.5 degC	28.1 degC	28.5 degC
1734868059	12.9 VDC	52.1 degC	29.1 degC	29.1 degC
1734864459	12.9 VDC	53.7 degC	30.2 degC	30 degC
1734860863	12.9 VDC	54.2 degC	31.6 degC	30.9 degC
1734857264	13.1 VDC	55.8 degC	32.6 degC	31.4 degC
1734853665	13.6 VDC	55.8 degC	33.4 degC	31.7 degC
1734850066	13.6 VDC	56.4 degC	34 degC	31.9 degC
1734846468	13.7 VDC	56.4 degC	34.5 degC	31.7 degC
1734842871	13.7 VDC	56.9 degC	34.8 degC	31.5 degC
1734839272	13.7 VDC	58 degC	35 degC	31.2 degC
1734835674	13.7 VDC	56.9 degC	35.4 degC	31 degC
1734832076	13.7 VDC	56.9 degC	35 degC	30.6 degC
1734828478	13.7 VDC	56.4 degC	34.6 degC	29.9 degC
1734817687	14.4 VDC	48.3 degC	26.2 degC	25.3 degC
1734814085	13.6 VDC	47.2 degC	24.8 degC	24.6 degC
1734810487	12.8 VDC	47.2 degC	24.1 degC	24.5 degC
1734806897	12.7 VDC	47.2 degC	24.1 degC	24.9 degC
1734803291	12.7 VDC	48.9 degC	24.8 degC	25.5 degC
1734799691	12.8 VDC	49.4 degC	25.7 degC	26.4 degC
1734796097	12.8 VDC	49.9 degC	26.8 degC	27.4 degC

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Core: 0, 0.1, 0

Room: 0, 0.1, 0

Battery: 0, 0.1, 0

Tx: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)