This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734919709 | 14.81 | -224.4 | 124.38 | 1 | 35 |
| 1734918796 | 14.81 | -224.4 | 124.38 | 1 | 35 |
| 1734917885 | 14.81 | -224 | 124.38 | 1 | 35 |
| 1734916975 | 14.81 | -224.4 | 125 | 1 | 35 |
| 1734915155 | 14.81 | -224.4 | 125 | 1 | 35 |
| 1734914245 | 14.81 | -224.8 | 125 | 1 | 35 |
| 1734913367 | 14.81 | -224.4 | 125 | 1 | 35 |
| 1734912426 | 14.81 | -224.4 | 125.63 | 1 | 34 |
| 1734907899 | 14.81 | -224.4 | 128.13 | 1 | 35 |
| 1734906969 | 14.81 | -224.4 | 127.5 | 1 | 35 |
| 1734903328 | 14.81 | -224.4 | 128.13 | 1 | 34 |
| 1734902423 | 14.81 | -224.4 | 129.38 | 1 | 34 |
| 1734900596 | 14.81 | -224.4 | 128.75 | 1 | 35 |
| 1734897891 | 14.81 | -224.4 | 126.25 | 1 | 35 |
| 1734896077 | 14.81 | -224.4 | 123.75 | 1 | 34 |
| 1734891496 | 14.81 | -224.8 | 124.38 | 1 | 34 |
| 1734890601 | 14.81 | -224.4 | 123.75 | 1 | 35 |
| 1734886036 | 14.81 | -224.4 | 123.13 | 1 | 35 |
| 1734885126 | 14.81 | -224.4 | 123.13 | 1 | 35 |
| 1734883305 | 14.81 | -224.4 | 123.13 | 1 | 35 |
| 1734881485 | 14.81 | -224.8 | 123.13 | 1 | 35 |
| 1734880575 | 14.81 | -224.8 | 123.13 | 1 | 35 |
| 1734879665 | 14.81 | -224.8 | 123.13 | 1 | 35 |
| 1734877845 | 14.81 | -224.8 | 123.13 | 1 | 35 |
| 1734875115 | 14.81 | -224.8 | 123.13 | 1 | 34 |
*Used Equation Coefficients:
Value1: 0, -0.0644, 15
Value2: 0, -0.4, -190
Value3: 0, 0.625, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)