This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Sate* | Temp* | Volt* | Alt* | A5* |
---|---|---|---|---|---|
1718280134 | 12 | 695 C | 416 V | 52 M | 0 |
1718277134 | 12 | 697 C | 416 V | 52 M | 0 |
1718274134 | 12 | 699 C | 416 V | 52 M | 0 |
1718271134 | 12 | 700 C | 416 V | 51 M | 0 |
1718268134 | 12 | 703 C | 416 V | 51 M | 0 |
1718265134 | 12 | 705 C | 416 V | 52 M | 0 |
1718262134 | 12 | 708 C | 416 V | 52 M | 0 |
1718259134 | 12 | 711 C | 416 V | 52 M | 0 |
1718256134 | 12 | 715 C | 416 V | 50 M | 0 |
1718253134 | 12 | 720 C | 416 V | 51 M | 0 |
1718250134 | 12 | 725 C | 416 V | 52 M | 0 |
1718247133 | 12 | 730 C | 416 V | 53 M | 0 |
1718244134 | 12 | 734 C | 416 V | 52 M | 0 |
1718241134 | 12 | 735 C | 415 V | 52 M | 0 |
1718238134 | 12 | 737 C | 416 V | 52 M | 0 |
1718235134 | 12 | 730 C | 416 V | 51 M | 0 |
1718234264 | 12 | 728 C | 415 V | 51 M | 0 |
1718233953 | 12 | 727 C | 415 V | 50 M | 0 |
1718232683 | 12 | 726 C | 415 V | 50 M | 0 |
1718229683 | 12 | 737 C | 414 V | 51 M | 0 |
1718226683 | 12 | 741 C | 415 V | 51 M | 0 |
1718223683 | 12 | 747 C | 416 V | 51 M | 0 |
1718220683 | 12 | 743 C | 416 V | 52 M | 0 |
1718217683 | 12 | 744 C | 416 V | 50 M | 0 |
1718214682 | 12 | 732 C | 415 V | 50 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 1, 0
Volt: 0, 1, 0
Alt: 0, 1, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)