This is the latest recevied telemetry packets stored in our database for station/object CT2IRK-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719940982 | 159 | 185 | 210 | 215 | 165 |
1719932724 | 164 | 192 | 226 | 233 | 181 |
1719932540 | 164 | 195 | 218 | 233 | 181 |
1719932357 | 163 | 194 | 218 | 221 | 179 |
1719932174 | 164 | 193 | 216 | 218 | 175 |
1719931991 | 164 | 190 | 216 | 213 | 168 |
1719931808 | 164 | 191 | 228 | 232 | 179 |
1719931625 | 164 | 191 | 218 | 234 | 178 |
1719931464 | 164 | 189 | 225 | 232 | 179 |
1719931403 | 164 | 191 | 218 | 234 | 183 |
1719931074 | 164 | 192 | 226 | 219 | 176 |
1719930523 | 164 | 191 | 228 | 232 | 179 |
1719930195 | 165 | 191 | 224 | 227 | 168 |
1719929971 | 165 | 192 | 226 | 233 | 176 |
1719929788 | 165 | 191 | 228 | 232 | 179 |
1719929604 | 165 | 192 | 208 | 224 | 165 |
1719929421 | 165 | 192 | 211 | 220 | 172 |
1719928652 | 164 | 196 | 216 | 226 | 174 |
1719926820 | 167 | 177 | 213 | 227 | 174 |
1719921902 | 160 | 195 | 216 | 219 | 176 |
1719915286 | 161 | 196 | 210 | 215 | 171 |
1719915103 | 161 | 195 | 219 | 229 | 169 |
1719914919 | 160 | 193 | 209 | 216 | 176 |
1719914736 | 159 | 196 | 220 | 231 | 178 |
1719907070 | 153 | 195 | 217 | 216 | 173 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)