RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS3LSE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3LSE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734908881	21 Pkt	0 Pkt	0 Pkt	-67 dBm	0.1 V
1734906154	19 Pkt	1 Pkt	1 Pkt	-65 dBm	0.1 V
1734903421	91 Pkt	0 Pkt	0 Pkt	-58 dBm	0.29 V
1734895899	23 Pkt	2 Pkt	0 Pkt	-61 dBm	0.1 V
1734893171	22 Pkt	2 Pkt	1 Pkt	-63 dBm	0.1 V
1734890445	21 Pkt	0 Pkt	0 Pkt	-77 dBm	0.1 V
1734887718	21 Pkt	0 Pkt	0 Pkt	-57 dBm	0.1 V
1734884992	21 Pkt	0 Pkt	0 Pkt	-76 dBm	0.1 V
1734882265	50 Pkt	0 Pkt	0 Pkt	-72 dBm	0.27 V
1734879538	43 Pkt	1 Pkt	0 Pkt	-60 dBm	0.1 V
1734876809	24 Pkt	1 Pkt	0 Pkt	-62 dBm	0.1 V
1734874083	21 Pkt	0 Pkt	0 Pkt	-62 dBm	0.1 V
1734871355	102 Pkt	3 Pkt	0 Pkt	-63 dBm	0.1 V
1734868627	81 Pkt	0 Pkt	0 Pkt	-75 dBm	0.27 V
1734865899	151 Pkt	0 Pkt	0 Pkt	-73 dBm	0.1 V
1734863170	87 Pkt	0 Pkt	0 Pkt	-76 dBm	0.1 V
1734860443	43 Pkt	1 Pkt	0 Pkt	-73 dBm	0.27 V
1734857715	33 Pkt	0 Pkt	0 Pkt	-66 dBm	0.1 V
1734854988	17 Pkt	1 Pkt	0 Pkt	-67 dBm	0.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)