RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SHLBTP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SHLBTP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734929434	14.38 Volt	70 Pkt	20 Pkt	68 Pcnt
1734927634	14.38 Volt	70 Pkt	20 Pkt	70 Pcnt
1734925834	14.38 Volt	70 Pkt	20 Pkt	77 Pcnt
1734924034	14.38 Volt	60 Pkt	20 Pkt	80 Pcnt
1734922234	14.38 Volt	60 Pkt	20 Pkt	80 Pcnt
1734920435	14.38 Volt	70 Pkt	20 Pkt	83 Pcnt
1734918635	14.38 Volt	80 Pkt	20 Pkt	86 Pcnt
1734916835	14.38 Volt	80 Pkt	30 Pkt	82 Pcnt
1734915035	14.38 Volt	70 Pkt	20 Pkt	81 Pcnt
1734913235	14.38 Volt	60 Pkt	10 Pkt	75 Pcnt
1734911435	14.38 Volt	50 Pkt	10 Pkt	73 Pcnt
1734909635	14.22 Volt	60 Pkt	10 Pkt	79 Pcnt
1734907835	14.38 Volt	70 Pkt	10 Pkt	79 Pcnt
1734906035	14.38 Volt	60 Pkt	10 Pkt	74 Pcnt
1734904235	14.38 Volt	70 Pkt	20 Pkt	77 Pcnt
1734902435	14.3 Volt	90 Pkt	30 Pkt	85 Pcnt
1734900636	14.38 Volt	90 Pkt	30 Pkt	89 Pcnt
1734898836	14.38 Volt	60 Pkt	20 Pkt	82 Pcnt
1734897036	14.38 Volt	60 Pkt	30 Pkt	79 Pcnt
1734895236	14.38 Volt	70 Pkt	30 Pkt	83 Pcnt
1734893436	14.38 Volt	80 Pkt	30 Pkt	90 Pcnt
1734891636	14.38 Volt	80 Pkt	20 Pkt	88 Pcnt
1734889836	14.14 Volt	70 Pkt	20 Pkt	85 Pcnt
1734888036	14.38 Volt	50 Pkt	20 Pkt	89 Pcnt
1734886236	14.38 Volt	50 Pkt	10 Pkt	62 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)