RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IZ4GWE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ4GWE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1734930261	128 Pkt	770 Pkt	0.3 Pcnt	72 Pcnt
1734929961	134 Pkt	760 Pkt	0.3 Pcnt	72 Pcnt
1734929660	133 Pkt	750 Pkt	0.3 Pcnt	72 Pcnt
1734929360	123 Pkt	720 Pkt	0.3 Pcnt	72 Pcnt
1734929060	109 Pkt	720 Pkt	0.3 Pcnt	72 Pcnt
1734928760	106 Pkt	720 Pkt	0.3 Pcnt	72 Pcnt
1734928459	128 Pkt	710 Pkt	0.3 Pcnt	72 Pcnt
1734928159	138 Pkt	690 Pkt	0.3 Pcnt	72 Pcnt
1734927859	127 Pkt	680 Pkt	0.3 Pcnt	72 Pcnt
1734927558	110 Pkt	670 Pkt	0.3 Pcnt	72 Pcnt
1734927258	106 Pkt	660 Pkt	0.3 Pcnt	72 Pcnt
1734926958	106 Pkt	660 Pkt	0.3 Pcnt	72 Pcnt
1734926657	106 Pkt	680 Pkt	0.3 Pcnt	72 Pcnt
1734926357	95 Pkt	690 Pkt	0.3 Pcnt	72 Pcnt
1734926057	109 Pkt	710 Pkt	0.3 Pcnt	72 Pcnt
1734925757	121 Pkt	710 Pkt	0.3 Pcnt	72 Pcnt
1734925456	93 Pkt	690 Pkt	0.3 Pcnt	72 Pcnt
1734925156	86 Pkt	710 Pkt	0.3 Pcnt	72 Pcnt
1734924856	105 Pkt	730 Pkt	0.3 Pcnt	72 Pcnt
1734924555	114 Pkt	730 Pkt	0.3 Pcnt	72 Pcnt
1734924255	107 Pkt	750 Pkt	0.3 Pcnt	72 Pcnt
1734923955	100 Pkt	750 Pkt	0.3 Pcnt	72 Pcnt
1734923655	122 Pkt	760 Pkt	0.3 Pcnt	72 Pcnt
1734923054	131 Pkt	750 Pkt	0.3 Pcnt	72 Pcnt
1734922754	107 Pkt	740 Pkt	0.3 Pcnt	72 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)