This is the latest recevied telemetry packets stored in our database for station/object YO7MGH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | T ext.* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734994896 | 4.1 °C | 0 | 0 | 0 | 0 |
| 1734994298 | 4 °C | 0 | 0 | 0 | 0 |
| 1734993698 | 3.9 °C | 0 | 0 | 0 | 0 |
| 1734993097 | 3.8 °C | 0 | 0 | 0 | 0 |
| 1734992498 | 3.7 °C | 0 | 0 | 0 | 0 |
| 1734991898 | 3.6 °C | 0 | 0 | 0 | 0 |
| 1734991297 | 3.6 °C | 0 | 0 | 0 | 0 |
| 1734990698 | 3.6 °C | 0 | 0 | 0 | 0 |
| 1734990098 | 3.6 °C | 0 | 0 | 0 | 0 |
| 1734989497 | 3.5 °C | 0 | 0 | 0 | 0 |
| 1734988898 | 3.2 °C | 0 | 0 | 0 | 0 |
| 1734988298 | 3.2 °C | 0 | 0 | 0 | 0 |
| 1734987697 | 3.1 °C | 0 | 0 | 0 | 0 |
| 1734987097 | 3 °C | 0 | 0 | 0 | 0 |
| 1734986497 | 2.9 °C | 0 | 0 | 0 | 0 |
| 1734985896 | 2.8 °C | 0 | 0 | 0 | 0 |
| 1734985297 | 2.6 °C | 0 | 0 | 0 | 0 |
| 1734984697 | 2.6 °C | 0 | 0 | 0 | 0 |
| 1734984096 | 2.5 °C | 0 | 0 | 0 | 0 |
| 1734983498 | 2.5 °C | 0 | 0 | 0 | 0 |
| 1734982898 | 2.5 °C | 0 | 0 | 0 | 0 |
| 1734982297 | 2.5 °C | 0 | 0 | 0 | 0 |
| 1734981698 | 2.4 °C | 0 | 0 | 0 | 0 |
| 1734981098 | 2.2 °C | 0 | 0 | 0 | 0 |
| 1734980497 | 2.1 °C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
T ext.: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)