RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E23JWE-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E23JWE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734968029	0 Pkt	1 Pkt	-49 dBm	9.43 V
1734966207	0 Pkt	0 Pkt	-50 dBm	9.19 V
1734964385	0 Pkt	0 Pkt	-49 dBm	9.43 V
1734962563	0 Pkt	0 Pkt	-51 dBm	9.43 V
1734960741	0 Pkt	1 Pkt	-48 dBm	9.19 V
1734958919	0 Pkt	0 Pkt	-46 dBm	9.43 V
1734957097	0 Pkt	0 Pkt	-50 dBm	9.43 V
1734955275	0 Pkt	1 Pkt	-49 dBm	9.43 V
1734953452	0 Pkt	2 Pkt	-52 dBm	9.45 V
1734951630	0 Pkt	0 Pkt	-50 dBm	9.43 V
1734949809	0 Pkt	0 Pkt	-50 dBm	9.43 V
1734947987	1 Pkt	0 Pkt	-50 dBm	9.21 V
1734946164	0 Pkt	0 Pkt	-49 dBm	9.43 V
1734944342	0 Pkt	0 Pkt	-50 dBm	9.43 V
1734942520	0 Pkt	0 Pkt	-52 dBm	9.45 V
1734940698	0 Pkt	0 Pkt	-49 dBm	9.43 V
1734938876	0 Pkt	0 Pkt	-51 dBm	9.43 V
1734937054	0 Pkt	0 Pkt	-50 dBm	9.43 V
1734929765	0 Pkt	3 Pkt	-47 dBm	9.43 V
1734927943	0 Pkt	0 Pkt	-49 dBm	9.43 V
1734926121	0 Pkt	0 Pkt	-50 dBm	9.17 V
1734924299	0 Pkt	2 Pkt	-52 dBm	9.43 V
1734922477	0 Pkt	1 Pkt	-50 dBm	9.17 V
1734920655	0 Pkt	2 Pkt	-49 dBm	9.43 V
1734918833	0 Pkt	0 Pkt	-52 dBm	9.43 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)