This is the latest recevied telemetry packets stored in our database for station/object DB0OTV-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1720195524 | 157 | 170 | 250 | 0 | 0 |
1720192327 | 157 | 176 | 251 | 0 | 0 |
1720189153 | 157 | 176 | 251 | 0 | 0 |
1720185961 | 156 | 177 | 251 | 0 | 0 |
1720182733 | 157 | 176 | 251 | 0 | 0 |
1720179502 | 157 | 176 | 251 | 0 | 0 |
1720176322 | 156 | 177 | 251 | 0 | 0 |
1720173105 | 156 | 175 | 251 | 0 | 0 |
1720169930 | 156 | 184 | 251 | 0 | 0 |
1720166733 | 155 | 183 | 251 | 0 | 0 |
1720163592 | 156 | 184 | 252 | 0 | 0 |
1720160424 | 155 | 170 | 250 | 0 | 0 |
1720157265 | 155 | 160 | 249 | 0 | 0 |
1720154082 | 155 | 163 | 249 | 0 | 0 |
1720150908 | 155 | 161 | 249 | 0 | 0 |
1720147689 | 156 | 161 | 249 | 0 | 0 |
1720144494 | 155 | 162 | 249 | 0 | 0 |
1720141306 | 156 | 161 | 249 | 0 | 0 |
1720138125 | 156 | 162 | 249 | 0 | 0 |
1720134929 | 156 | 162 | 250 | 0 | 0 |
1720131735 | 156 | 163 | 250 | 0 | 0 |
1720128582 | 156 | 162 | 250 | 0 | 0 |
1720125409 | 156 | 164 | 250 | 0 | 0 |
1720122222 | 156 | 164 | 250 | 0 | 0 |
1720119009 | 156 | 164 | 249 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)