RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VE7ROC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7ROC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1736385759	124	30	102	41	48
1736383934	126	32	74	41	48
1736382117	126	33	74	41	48
1736378465	126	51	65	41	48
1736376642	126	29	74	41	74
1736374817	126	29	101	41	48
1736372992	126	33	74	41	48
1736371171	126	33	74	40	48
1736369346	126	31	74	41	48
1736367522	126	30	74	41	48
1736365694	126	29	74	41	47
1736363868	126	29	74	40	48
1736362048	126	30	74	41	48
1736360226	126	29	74	40	48
1736358404	126	31	74	66	48
1736356581	125	33	74	41	48
1736354760	125	30	74	40	48
1736351118	125	30	101	41	48
1736349301	125	29	74	41	48
1736347482	125	29	74	41	48
1736345665	125	30	74	40	48
1736343850	125	31	74	41	48
1736342036	125	33	74	40	48
1736340215	125	32	74	41	48
1736338397	125	30	74	41	48

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)