RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

DB0LSB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0LSB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734937368	15.75 Volt	540 Pkt	180 Pkt	86 Pcnt
1734936768	15.98 Volt	540 Pkt	180 Pkt	87 Pcnt
1734936168	16.13 Volt	540 Pkt	180 Pkt	86 Pcnt
1734930160	15.9 Volt	470 Pkt	150 Pkt	88 Pcnt
1734929563	15.45 Volt	470 Pkt	150 Pkt	87 Pcnt
1734928959	15.83 Volt	460 Pkt	140 Pkt	87 Pcnt
1734928359	15.6 Volt	470 Pkt	150 Pkt	88 Pcnt
1734927758	15.9 Volt	450 Pkt	140 Pkt	89 Pcnt
1734927158	13.88 Volt	460 Pkt	150 Pkt	88 Pcnt
1734926557	15.75 Volt	470 Pkt	150 Pkt	87 Pcnt
1734925956	15.83 Volt	460 Pkt	160 Pkt	87 Pcnt
1734925356	14.55 Volt	470 Pkt	160 Pkt	88 Pcnt
1734924755	15.98 Volt	470 Pkt	160 Pkt	88 Pcnt
1734924155	15.68 Volt	480 Pkt	170 Pkt	87 Pcnt
1734923554	15.98 Volt	470 Pkt	160 Pkt	88 Pcnt
1734922953	15.83 Volt	450 Pkt	150 Pkt	87 Pcnt
1734922353	15.83 Volt	440 Pkt	150 Pkt	87 Pcnt
1734921752	16.13 Volt	430 Pkt	150 Pkt	86 Pcnt
1734921156	15.6 Volt	420 Pkt	140 Pkt	86 Pcnt
1734920551	15.75 Volt	410 Pkt	130 Pkt	84 Pcnt
1734919951	15.75 Volt	430 Pkt	140 Pkt	85 Pcnt
1734919350	15.9 Volt	440 Pkt	150 Pkt	83 Pcnt
1734918750	15.6 Volt	450 Pkt	150 Pkt	84 Pcnt
1734918150	15.75 Volt	440 Pkt	150 Pkt	83 Pcnt
1734917548	15.6 Volt	440 Pkt	150 Pkt	84 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)