RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LU9HW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU9HW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	RSSI*	Voltage*
1734920382	3 Pkt	-62 dBm	12.1 V
1734885088	0 Pkt	-54 dBm	11.98 V
1734884167	0 Pkt	-49 dBm	12 V
1734883244	0 Pkt	-53 dBm	12 V
1734882323	0 Pkt	-55 dBm	12 V
1734881401	0 Pkt	-54 dBm	12 V
1734880477	0 Pkt	-49 dBm	12 V
1734879556	3 Pkt	-51 dBm	11.98 V
1734878630	0 Pkt	-53 dBm	12 V
1734877277	10 Pkt	-50 dBm	12 V
1734876353	0 Pkt	-51 dBm	11.98 V
1734875432	0 Pkt	-51 dBm	12 V
1734874510	0 Pkt	-48 dBm	12 V
1734873588	0 Pkt	-51 dBm	11.94 V
1734872666	0 Pkt	-47 dBm	11.98 V
1734871744	0 Pkt	-47 dBm	11.98 V
1734870822	0 Pkt	-46 dBm	11.98 V
1734869900	0 Pkt	-49 dBm	11.96 V
1734868976	0 Pkt	-45 dBm	11.96 V
1734868048	0 Pkt	-46 dBm	11.96 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)