This is the latest recevied telemetry packets stored in our database for station/object XE1CGG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718484330 | 134 | 32 | 999 | 355 | 234 |
1718480777 | 141 | 31 | 999 | 356 | 229 |
1718477224 | 144 | 31 | 999 | 359 | 236 |
1718473671 | 141 | 30 | 999 | 365 | 237 |
1718470118 | 133 | 29 | 999 | 370 | 243 |
1718466566 | 131 | 28 | 999 | 374 | 240 |
1718463012 | 125 | 28 | 999 | 379 | 247 |
1718459459 | 124 | 27 | 999 | 381 | 255 |
1718455906 | 124 | 27 | 999 | 381 | 255 |
1718452356 | 124 | 27 | 999 | 380 | 254 |
1718448800 | 124 | 28 | 999 | 377 | 251 |
1718445247 | 124 | 29 | 999 | 374 | 249 |
1718441694 | 124 | 29 | 999 | 373 | 247 |
1718438141 | 124 | 29 | 999 | 372 | 245 |
1718434589 | 125 | 30 | 999 | 370 | 246 |
1718431036 | 125 | 30 | 999 | 367 | 243 |
1718427483 | 126 | 31 | 999 | 363 | 229 |
1718423930 | 126 | 31 | 999 | 360 | 233 |
1718420377 | 127 | 32 | 999 | 354 | 229 |
1718416824 | 127 | 32 | 999 | 354 | 229 |
1718413271 | 128 | 33 | 999 | 348 | 222 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)