RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BX6AM-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX6AM-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/10m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1734971065	40 C	9 p	47 p	1583 p	115 p
1734969865	40 C	7 p	46 p	1568 p	110 p
1734968666	40 C	14 p	46 p	1556 p	105 p
1734967465	40 C	8 p	34 p	1536 p	99 p
1734966265	40 C	8 p	32 p	1522 p	94 p
1734965065	39 C	4 p	32 p	1510 p	89 p
1734963865	41 C	5 p	40 p	1502 p	85 p
1734962664	40 C	8 p	49 p	1490 p	80 p
1734961464	40 C	10 p	54 p	1478 p	75 p
1734960265	41 C	12 p	55 p	1462 p	67 p
1734959065	41 C	9 p	52 p	1441 p	62 p
1734957866	39 C	11 p	48 p	1424 p	57 p
1734956665	41 C	10 p	53 p	1407 p	51 p
1734955464	41 C	9 p	87 p	1389 p	46 p
1734954264	39 C	13 p	116 p	1376 p	41 p
1734953064	39 C	19 p	134 p	1354 p	35 p
1734951864	39 C	25 p	110 p	1302 p	29 p
1734950664	39 C	30 p	124 p	1260 p	20 p
1734949464	40 C	9 p	152 p	1220 p	10 p
1734948264	39 C	30 p	187 p	1192 p	5 p
1734947065	39 C	23 p	184 p	1136 p	0 p
1734946718	39 C	41 p	203 p	1129 p	20 p
1734945517	39 C	35 p	192 p	1050 p	15 p
1734944317	39 C	29 p	170 p	989 p	7 p
1734943117	38 C	37 p	150 p	926 p	1 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/10m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)