This is the latest recevied telemetry packets stored in our database for station/object VA7GFZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Temp* | Rx1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1734897320 | 28.2 Volt | -3 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734894555 | 28.4 Volt | -3.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734891795 | 25.4 Volt | -4 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734889037 | 24.8 Volt | -4 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734886276 | 24.8 Volt | -4 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734883518 | 24.8 Volt | -4.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734880756 | 24.8 Volt | -4.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734872476 | 24.8 Volt | -3.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734866956 | 25 Volt | -2.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734864196 | 25 Volt | -1.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734861436 | 25 Volt | -0.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734855917 | 25 Volt | 0 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734853157 | 25 Volt | 0 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734850397 | 25.2 Volt | -0.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734847638 | 25.2 Volt | -1 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734844878 | 25.2 Volt | -2.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734842118 | 25.2 Volt | -2 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734839357 | 25.2 Volt | -2 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734836599 | 25.2 Volt | -2 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734831079 | 25.4 Volt | -1.5 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734828317 | 25.4 Volt | -1 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734825558 | 25.8 Volt | -1 C | 0 Pkt | 670 Pcnt | 0 None |
| 1734822798 | 27 Volt | -1 C | 0 Pkt | 670 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.2, 0
Temp: 0, 0.5, -64
Rx1h: 0, 10, 0
Eff1h: 0, 10, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)