RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SNOW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SNOW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1734907010	145	50	34	24	123
1734904460	144	48	33	24	123
1734901911	145	47	32	24	123
1734899464	-	-	-	-	-
1734899360	140	46	32	24	123
1734897129	-	-	-	-	-
1734896810	137	46	32	23	123
1734894260	133	45	32	23	123
1734891710	131	45	32	23	123
1734889160	130	44	31	24	123
1734886610	129	44	31	24	123
1734884060	128	44	31	24	123
1734881510	128	45	32	23	123
1734878960	128	45	32	23	123
1734876411	128	46	32	23	124
1734873860	128	46	32	24	123
1734871310	128	47	32	24	123
1734868760	128	47	32	24	123
1734866210	128	46	32	24	123
1734863660	128	46	32	24	123
1734861110	128	46	32	23	123
1734858560	129	46	32	23	123
1734856009	129	46	32	24	123
1734853459	129	46	32	24	123
1734850909	129	46	32	24	123

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)