RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E27CYF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E27CYF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734882163	3 Pkt	0 Pkt	-68 dBm	12.86 V
1734881239	0 Pkt	0 Pkt	-68 dBm	12.86 V
1734880315	3 Pkt	0 Pkt	-68 dBm	12.88 V
1734879352	1 Pkt	0 Pkt	-68 dBm	12.88 V
1734878428	2 Pkt	0 Pkt	-68 dBm	12.88 V
1734877503	0 Pkt	1 Pkt	-67 dBm	12.88 V
1734876580	3 Pkt	0 Pkt	-68 dBm	12.88 V
1734875655	1 Pkt	0 Pkt	-66 dBm	12.88 V
1734874719	2 Pkt	0 Pkt	-67 dBm	12.88 V
1734873795	3 Pkt	0 Pkt	-66 dBm	12.9 V
1734872871	4 Pkt	0 Pkt	-68 dBm	12.88 V
1734871946	2 Pkt	0 Pkt	-66 dBm	12.9 V
1734871022	3 Pkt	2 Pkt	-64 dBm	12.9 V
1734870097	3 Pkt	0 Pkt	-67 dBm	12.88 V
1734869173	1 Pkt	1 Pkt	-69 dBm	12.88 V
1734868249	1 Pkt	0 Pkt	-67 dBm	12.9 V
1734867324	2 Pkt	0 Pkt	-67 dBm	12.92 V
1734866400	6 Pkt	0 Pkt	-65 dBm	12.88 V
1734865476	0 Pkt	0 Pkt	-63 dBm	12.88 V
1734864552	1 Pkt	0 Pkt	-63 dBm	12.9 V
1734863628	2 Pkt	0 Pkt	-64 dBm	12.9 V
1734862703	1 Pkt	0 Pkt	-64 dBm	12.9 V
1734861779	2 Pkt	0 Pkt	-63 dBm	12.92 V
1734860855	1 Pkt	0 Pkt	-64 dBm	12.92 V
1734859931	5 Pkt	0 Pkt	-64 dBm	12.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)