RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

PY5TG-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PY5TG-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Tbat*	Vpainel*	Tpainel*	RSSI-*
1734955102	13.3 V	20.6 .C	15.4 V	19.4 .C	64 dBm
1734954200	13.1 V	20.4 .C	15.2 V	18.6 .C	56 dBm
1734953302	13 V	19.8 .C	15 V	17.4 .C	61 dBm
1734952400	13.1 V	20.2 .C	15.1 V	18.4 .C	57 dBm
1734951500	13.1 V	19.2 .C	15.2 V	18 .C	62 dBm
1734950603	12.9 V	19 .C	14.9 V	16.8 .C	56 dBm
1734949703	12.9 V	18.6 .C	14.9 V	16.2 .C	56 dBm
1734948803	12.9 V	18.2 .C	14.8 V	15.8 .C	63 dBm
1734947903	12.9 V	18.2 .C	14.7 V	15.6 .C	58 dBm
1734947003	12.9 V	17.8 .C	14.7 V	15.2 .C	61 dBm
1734946103	12.9 V	18 .C	13.3 V	15.2 .C	63 dBm
1734945203	12.9 V	17.8 .C	13.8 V	15.2 .C	56 dBm
1734944303	12.9 V	18 .C	13.4 V	15 .C	62 dBm
1734943403	12.8 V	17.6 .C	13.1 V	14.8 .C	55 dBm
1734942503	12.9 V	17.4 .C	10.3 V	14.6 .C	57 dBm
1734941603	12.9 V	17.4 .C	6.2 V	14.6 .C	57 dBm
1734940703	12.9 V	17.4 .C	0 V	14.6 .C	63 dBm
1734939803	12.9 V	17.4 .C	0 V	14.6 .C	63 dBm
1734938903	12.9 V	17.4 .C	0 V	14.6 .C	57 dBm
1734938003	12.9 V	17.6 .C	0 V	14.6 .C	57 dBm
1734937103	12.9 V	17.6 .C	0 V	14.6 .C	59 dBm
1734936201	12.9 V	17.6 .C	0 V	14.8 .C	62 dBm
1734929902	13 V	17.6 .C	0 V	14.6 .C	62 dBm
1734929000	13 V	17.6 .C	0 V	14.8 .C	63 dBm
1734928102	13 V	17.6 .C	0 V	14.6 .C	62 dBm

*Used Equation Coefficients:

Vbat: 0, 0.1, 0

Tbat: 0, 0.2, 0

Vpainel: 0, 0.1, 0

Tpainel: 0, 0.2, 0

RSSI-: 0, 0.5, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)