This is the latest recevied telemetry packets stored in our database for station/object SP8EBC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx10min* | Tx10min* | Digi10min* | srvrTimeout* | Uptime* |
---|---|---|---|---|---|
1715875821 | 47 Pkt | 8 Pkt | 7 Pkt | 12 Cnt | 0 Hours |
1715875221 | 101 Pkt | 8 Pkt | 4 Pkt | 8 Cnt | 0 Hours |
1715874621 | 23 Pkt | 3 Pkt | 2 Pkt | 4 Cnt | 0 Hours |
1715873582 | 19 Pkt | 2 Pkt | 1 Pkt | 24 Cnt | 1 Hours |
1715872982 | 41 Pkt | 3 Pkt | 2 Pkt | 20 Cnt | 0 Hours |
1715872382 | 25 Pkt | 3 Pkt | 2 Pkt | 16 Cnt | 0 Hours |
1715871782 | 29 Pkt | 3 Pkt | 2 Pkt | 12 Cnt | 0 Hours |
1715871182 | 34 Pkt | 6 Pkt | 2 Pkt | 8 Cnt | 0 Hours |
1715870582 | 25 Pkt | 1 Pkt | 0 Pkt | 4 Cnt | 0 Hours |
1715869545 | 31 Pkt | 1 Pkt | 0 Pkt | 24 Cnt | 1 Hours |
1715868945 | 23 Pkt | 1 Pkt | 0 Pkt | 20 Cnt | 0 Hours |
1715868345 | 19 Pkt | 3 Pkt | 2 Pkt | 16 Cnt | 0 Hours |
1715867745 | 32 Pkt | 2 Pkt | 1 Pkt | 12 Cnt | 0 Hours |
1715867145 | 16 Pkt | 5 Pkt | 1 Pkt | 8 Cnt | 0 Hours |
1715866545 | 11 Pkt | 1 Pkt | 0 Pkt | 4 Cnt | 0 Hours |
1715865508 | 13 Pkt | 1 Pkt | 0 Pkt | 24 Cnt | 1 Hours |
1715864908 | 19 Pkt | 2 Pkt | 1 Pkt | 20 Cnt | 0 Hours |
1715864308 | 34 Pkt | 3 Pkt | 2 Pkt | 16 Cnt | 0 Hours |
1715863708 | 13 Pkt | 3 Pkt | 2 Pkt | 12 Cnt | 0 Hours |
1715863108 | 15 Pkt | 4 Pkt | 0 Pkt | 8 Cnt | 0 Hours |
1715862508 | 24 Pkt | 3 Pkt | 2 Pkt | 4 Cnt | 0 Hours |
1715861469 | 18 Pkt | 2 Pkt | 1 Pkt | 24 Cnt | 1 Hours |
1715860870 | 63 Pkt | 2 Pkt | 1 Pkt | 20 Cnt | 0 Hours |
1715860270 | 32 Pkt | 2 Pkt | 1 Pkt | 16 Cnt | 0 Hours |
1715859669 | 26 Pkt | 2 Pkt | 1 Pkt | 12 Cnt | 0 Hours |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
srvrTimeout: 0, 1, 0
Uptime: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)