This is the latest recevied telemetry packets stored in our database for station/object XE1EL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1719628433 | 14.62 Volt | 120 Pkt | 10 Pkt | 78 Pcnt | 0 None |
1719628431 | 14.62 Volt | 120 Pkt | 10 Pkt | 78 Pcnt | 0 None |
1719626570 | 14.93 Volt | 80 Pkt | 0 Pkt | 78 Pcnt | 0 None |
1719626569 | 14.93 Volt | 80 Pkt | 0 Pkt | 78 Pcnt | 0 None |
1719624707 | 14.93 Volt | 70 Pkt | 0 Pkt | 78 Pcnt | 0 None |
1719622847 | 14.93 Volt | 90 Pkt | 0 Pkt | 78 Pcnt | 0 None |
1719622845 | 14.93 Volt | 90 Pkt | 0 Pkt | 78 Pcnt | 0 None |
1719620983 | 14.62 Volt | 90 Pkt | 0 Pkt | 79 Pcnt | 0 None |
1719619123 | 14.93 Volt | 80 Pkt | 0 Pkt | 80 Pcnt | 0 None |
1719619122 | 14.93 Volt | 80 Pkt | 0 Pkt | 80 Pcnt | 0 None |
1719617261 | 14.93 Volt | 70 Pkt | 0 Pkt | 84 Pcnt | 0 None |
1719617260 | 14.93 Volt | 70 Pkt | 0 Pkt | 84 Pcnt | 0 None |
1719615400 | 14.62 Volt | 60 Pkt | 0 Pkt | 81 Pcnt | 0 None |
1719615398 | 14.62 Volt | 60 Pkt | 0 Pkt | 81 Pcnt | 0 None |
1719613538 | 14.93 Volt | 50 Pkt | 0 Pkt | 80 Pcnt | 0 None |
1719613536 | 14.93 Volt | 50 Pkt | 0 Pkt | 80 Pcnt | 0 None |
1719611676 | 14.93 Volt | 50 Pkt | 0 Pkt | 74 Pcnt | 0 None |
1719611674 | 14.93 Volt | 50 Pkt | 0 Pkt | 74 Pcnt | 0 None |
1719609814 | 14.93 Volt | 50 Pkt | 0 Pkt | 71 Pcnt | 0 None |
1719609813 | 14.93 Volt | 50 Pkt | 0 Pkt | 71 Pcnt | 0 None |
1719607952 | 14.62 Volt | 80 Pkt | 0 Pkt | 84 Pcnt | 0 None |
1719607951 | 14.62 Volt | 80 Pkt | 0 Pkt | 84 Pcnt | 0 None |
1719606089 | 14.62 Volt | 90 Pkt | 0 Pkt | 79 Pcnt | 0 None |
1719604227 | 14.93 Volt | 90 Pkt | 0 Pkt | 76 Pcnt | 0 None |
1719602367 | 14.93 Volt | 90 Pkt | 0 Pkt | 77 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)