This is the latest recevied telemetry packets stored in our database for station/object ZL1AOX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Packets* | Gated to RF* | Free RAM* | Used Flash* | NC* |
---|---|---|---|---|---|
1718398807 | 0 # | 0 # | 1520 kb | 15 % | 0 |
1718397008 | 0 # | 0 # | 1510 kb | 15 % | 0 |
1718395238 | 0 # | 0 # | 1540 kb | 15 % | 0 |
1718394308 | 0 # | 0 # | 1530 kb | 15 % | 0 |
1718393408 | 0 # | 0 # | 1650 kb | 15 % | 0 |
1718392557 | 0 # | 0 # | 1580 kb | 15 % | 0 |
1718391607 | 0 # | 0 # | 1580 kb | 15 % | 0 |
1718390709 | 0 # | 0 # | 1600 kb | 15 % | 0 |
1718389811 | 0 # | 0 # | 1560 kb | 15 % | 0 |
1718388938 | 0 # | 0 # | 1600 kb | 15 % | 0 |
1718388028 | 0 # | 0 # | 1690 kb | 15 % | 0 |
1718387108 | 0 # | 0 # | 1720 kb | 15 % | 0 |
1718386207 | 0 # | 0 # | 1600 kb | 15 % | 0 |
1718385321 | 0 # | 0 # | 1730 kb | 15 % | 0 |
1718384417 | 0 # | 0 # | 1730 kb | 15 % | 0 |
1718383529 | 0 # | 0 # | 1610 kb | 15 % | 0 |
1718382608 | 0 # | 0 # | 1640 kb | 15 % | 0 |
1718381708 | 0 # | 0 # | 1610 kb | 15 % | 0 |
1718380808 | 0 # | 0 # | 1620 kb | 15 % | 0 |
1718379908 | 0 # | 0 # | 1670 kb | 15 % | 0 |
1718378108 | 1 # | 0 # | 1620 kb | 15 % | 0 |
1718377227 | 0 # | 0 # | 1640 kb | 15 % | 0 |
1718376328 | 0 # | 0 # | 1630 kb | 15 % | 0 |
1718375437 | 0 # | 0 # | 1620 kb | 15 % | 0 |
1718374508 | 0 # | 0 # | 1750 kb | 15 % | 0 |
*Used Equation Coefficients:
Packets: 0, 1, 0
Gated to RF: 0, 1, 0
Free RAM: 0, 10, 0
Used Flash: 0, 1, 0
NC: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)