This is the latest recevied telemetry packets stored in our database for station/object AE6LA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1736396254 | 453 | 595 | 0 | 0 | 0 |
| 1736396189 | 457 | 592 | 0 | 0 | 0 |
| 1736396154 | 456 | 592 | 0 | 0 | 0 |
| 1736396119 | 457 | 591 | 0 | 0 | 0 |
| 1736396081 | 462 | 590 | 0 | 0 | 0 |
| 1736396047 | 461 | 590 | 0 | 0 | 0 |
| 1736395984 | 428 | 589 | 0 | 0 | 0 |
| 1736395919 | 462 | 588 | 0 | 0 | 0 |
| 1736395755 | 467 | 585 | 0 | 0 | 0 |
| 1736395732 | 465 | 584 | 0 | 0 | 0 |
| 1736395695 | 464 | 583 | 0 | 0 | 0 |
| 1736395447 | 469 | 576 | 0 | 0 | 0 |
| 1736395423 | 466 | 576 | 0 | 0 | 0 |
| 1736395377 | 465 | 575 | 0 | 0 | 0 |
| 1736385643 | 466 | 600 | 0 | 0 | 0 |
| 1736385633 | 468 | 600 | 0 | 0 | 0 |
| 1736385454 | 471 | 598 | 0 | 0 | 0 |
| 1736385304 | 469 | 594 | 0 | 0 | 0 |
| 1736385219 | 470 | 591 | 0 | 0 | 0 |
| 1736385116 | 472 | 587 | 0 | 0 | 0 |
| 1736385077 | 472 | 586 | 0 | 0 | 0 |
| 1736385071 | 468 | 586 | 0 | 0 | 0 |
| 1736385041 | 463 | 585 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)