RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

OM3WYM-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OM3WYM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RSSI*	VBAT*
1734906515	-51 dBm	4.16 V
1734905321	-49 dBm	4.16 V
1734901135	-48 dBm	4.16 V
1734900534	-48 dBm	4.16 V
1734899336	-50 dBm	4.16 V
1734896344	-50 dBm	4.16 V
1734895143	-54 dBm	4.16 V
1734893947	-51 dBm	4.16 V
1734893348	-51 dBm	4.18 V
1734890354	-50 dBm	4.16 V
1734889756	-53 dBm	4.16 V
1734868208	-51 dBm	4.16 V
1734867608	-51 dBm	4.18 V
1734856233	-61 dBm	4.18 V
1734855634	-59 dBm	4.16 V
1734850249	-57 dBm	4.18 V
1734849650	-60 dBm	4.16 V
1734848451	-57 dBm	4.12 V
1734847852	-59 dBm	4.16 V
1734840059	-58 dBm	4.16 V
1734839460	-57 dBm	4.18 V
1734835867	-59 dBm	4.18 V
1734832872	-58 dBm	4.18 V
1734832273	-57 dBm	4.18 V
1734831676	-58 dBm	4.18 V

*Used Equation Coefficients:

RSSI: 0, -1, 0

VBAT: 0, 0.01, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)