This is the latest recevied telemetry packets stored in our database for station/object HS7ZSX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1734897386 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1734895493 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1734893678 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1734891864 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1734890049 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1734888234 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1734886419 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1734884604 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1734882789 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1734880974 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1734879159 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1734877344 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1734875529 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1734873714 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1734871899 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1734870085 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1734868270 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1734866455 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1734864640 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1734862825 | 0 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1734861010 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1734859195 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1734857380 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1734855565 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1734853750 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)