This is the latest recevied telemetry packets stored in our database for station/object KE0AIR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734893479 | 477 | 623 | 0 | 0 | 0 |
| 1734893359 | 478 | 624 | 0 | 0 | 0 |
| 1734893240 | 478 | 626 | 0 | 0 | 0 |
| 1734893120 | 478 | 627 | 0 | 0 | 0 |
| 1734893000 | 480 | 628 | 0 | 0 | 0 |
| 1734892881 | 477 | 629 | 0 | 0 | 0 |
| 1734892761 | 477 | 630 | 0 | 0 | 0 |
| 1734892642 | 478 | 631 | 0 | 0 | 0 |
| 1734892522 | 477 | 631 | 0 | 0 | 0 |
| 1734892402 | 475 | 631 | 0 | 0 | 0 |
| 1734892282 | 472 | 630 | 0 | 0 | 0 |
| 1734892163 | 478 | 629 | 0 | 0 | 0 |
| 1734892043 | 476 | 627 | 0 | 0 | 0 |
| 1734891923 | 476 | 625 | 0 | 0 | 0 |
| 1734891804 | 477 | 623 | 0 | 0 | 0 |
| 1734891444 | 475 | 614 | 0 | 0 | 0 |
| 1734891325 | 477 | 611 | 0 | 0 | 0 |
| 1734891205 | 478 | 607 | 0 | 0 | 0 |
| 1734890729 | 473 | 589 | 0 | 0 | 0 |
| 1734890608 | 472 | 586 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)