This is the latest recevied telemetry packets stored in our database for station/object EGLPAS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1720303408 | 151 | 182 | 253 | 0 | 0 |
1720302782 | 151 | 181 | 253 | 0 | 0 |
1720302157 | 151 | 180 | 252 | 0 | 0 |
1720301531 | 151 | 180 | 253 | 0 | 0 |
1720300262 | 150 | 180 | 252 | 0 | 0 |
1720299634 | 150 | 180 | 252 | 0 | 0 |
1720299009 | 151 | 180 | 252 | 0 | 0 |
1720298382 | 151 | 180 | 252 | 0 | 0 |
1720297756 | 151 | 180 | 252 | 0 | 0 |
1720297122 | 151 | 179 | 252 | 0 | 0 |
1720296495 | 151 | 185 | 252 | 0 | 0 |
1720295874 | 151 | 184 | 253 | 0 | 0 |
1720295249 | 151 | 184 | 253 | 0 | 0 |
1720294620 | 151 | 185 | 253 | 0 | 0 |
1720293988 | 151 | 184 | 252 | 0 | 0 |
1720293334 | 151 | 183 | 252 | 0 | 0 |
1720292697 | 151 | 173 | 251 | 0 | 0 |
1720292047 | 151 | 182 | 252 | 0 | 0 |
1720291405 | 151 | 183 | 252 | 0 | 0 |
1720290759 | 151 | 182 | 252 | 0 | 0 |
1720290113 | 151 | 182 | 252 | 0 | 0 |
1720289478 | 151 | 180 | 252 | 0 | 0 |
1720288849 | 151 | 179 | 253 | 0 | 0 |
1720288209 | 151 | 180 | 252 | 0 | 0 |
1720287561 | 151 | 179 | 253 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)