This is the latest recevied telemetry packets stored in our database for station/object YO9ABK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp_exterioara* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716128133 | 20.9 C | 0 | 0 | 0 | 0 |
1716126671 | 20.9 C | 0 | 0 | 0 | 0 |
1716126072 | 20.5 C | 0 | 0 | 0 | 0 |
1716125471 | 21.3 C | 0 | 0 | 0 | 0 |
1716124871 | 20.5 C | 0 | 0 | 0 | 0 |
1716124271 | 21.4 C | 0 | 0 | 0 | 0 |
1716123672 | 20.4 C | 0 | 0 | 0 | 0 |
1716123071 | 20.9 C | 0 | 0 | 0 | 0 |
1716122471 | 20.9 C | 0 | 0 | 0 | 0 |
1716121872 | 21.2 C | 0 | 0 | 0 | 0 |
1716121271 | 21.4 C | 0 | 0 | 0 | 0 |
1716120671 | 21 C | 0 | 0 | 0 | 0 |
1716120071 | 21.1 C | 0 | 0 | 0 | 0 |
1716119472 | 20.6 C | 0 | 0 | 0 | 0 |
1716118872 | 20.3 C | 0 | 0 | 0 | 0 |
1716118271 | 19.7 C | 0 | 0 | 0 | 0 |
1716117671 | 19.6 C | 0 | 0 | 0 | 0 |
1716117071 | 19.6 C | 0 | 0 | 0 | 0 |
1716116472 | 19.7 C | 0 | 0 | 0 | 0 |
1716115871 | 20 C | 0 | 0 | 0 | 0 |
1716115271 | 20.2 C | 0 | 0 | 0 | 0 |
1716114671 | 20.4 C | 0 | 0 | 0 | 0 |
1716114072 | 20.4 C | 0 | 0 | 0 | 0 |
1716113471 | 20.3 C | 0 | 0 | 0 | 0 |
1716112871 | 19.9 C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp_exterioara: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)