RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

F6DDS-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F6DDS-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	U*	Rx1h*	Dg1h*	Eff1h*
1734940951	3.45 Volt	140 Pkt	80 Pkt	82 Pcnt
1734940651	0 Volt	140 Pkt	80 Pkt	83 Pcnt
1734940351	0 Volt	130 Pkt	80 Pkt	82 Pcnt
1734940051	0 Volt	130 Pkt	70 Pkt	80 Pcnt
1734939751	0 Volt	130 Pkt	70 Pkt	80 Pcnt
1734939451	0 Volt	130 Pkt	70 Pkt	82 Pcnt
1734939151	0 Volt	130 Pkt	70 Pkt	81 Pcnt
1734938851	0 Volt	130 Pkt	70 Pkt	81 Pcnt
1734938551	0 Volt	130 Pkt	70 Pkt	81 Pcnt
1734938251	0 Volt	130 Pkt	70 Pkt	82 Pcnt
1734937951	3.83 Volt	130 Pkt	70 Pkt	82 Pcnt
1734937651	0 Volt	140 Pkt	70 Pkt	82 Pcnt
1734937351	0 Volt	140 Pkt	80 Pkt	85 Pcnt
1734937051	0 Volt	140 Pkt	80 Pkt	86 Pcnt
1734936751	16.73 Volt	140 Pkt	80 Pkt	85 Pcnt
1734936451	0 Volt	140 Pkt	80 Pkt	85 Pcnt
1734930151	8.63 Volt	100 Pkt	70 Pkt	84 Pcnt
1734929851	0 Volt	100 Pkt	70 Pkt	84 Pcnt
1734929551	0.23 Volt	100 Pkt	70 Pkt	85 Pcnt
1734929251	2.4 Volt	90 Pkt	60 Pkt	85 Pcnt
1734928951	7.43 Volt	90 Pkt	60 Pkt	89 Pcnt
1734928651	0 Volt	70 Pkt	50 Pkt	88 Pcnt
1734928351	11.55 Volt	70 Pkt	50 Pkt	87 Pcnt
1734928051	15.83 Volt	70 Pkt	50 Pkt	86 Pcnt
1734927751	14.18 Volt	70 Pkt	50 Pkt	86 Pcnt

*Used Equation Coefficients:

U: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)