This is the latest recevied telemetry packets stored in our database for station/object WA9TT-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1734888422 | 466 | 582 | 0 | 0 | 0 |
1734888358 | 466 | 580 | 0 | 0 | 0 |
1734888297 | 465 | 579 | 0 | 0 | 0 |
1734888262 | 467 | 578 | 0 | 0 | 0 |
1734888090 | 467 | 574 | 0 | 0 | 0 |
1734888037 | 466 | 572 | 0 | 0 | 0 |
1734888029 | 466 | 571 | 0 | 0 | 0 |
1734888019 | 466 | 570 | 0 | 0 | 0 |
1734888013 | 466 | 570 | 0 | 0 | 0 |
1734883027 | 467 | 575 | 0 | 0 | 0 |
1734883020 | 466 | 575 | 0 | 0 | 0 |
1734883008 | 466 | 575 | 0 | 0 | 0 |
1734882991 | 466 | 574 | 0 | 0 | 0 |
1734882901 | 465 | 572 | 0 | 0 | 0 |
1734882774 | 466 | 569 | 0 | 0 | 0 |
1734882769 | 466 | 569 | 0 | 0 | 0 |
1734880424 | 465 | 561 | 0 | 0 | 0 |
1734880421 | 467 | 561 | 0 | 0 | 0 |
1734880419 | 465 | 561 | 0 | 0 | 0 |
1734880385 | 465 | 561 | 0 | 0 | 0 |
1734880374 | 467 | 561 | 0 | 0 | 0 |
1734880369 | 465 | 561 | 0 | 0 | 0 |
1734880322 | 465 | 559 | 0 | 0 | 0 |
1734880267 | 464 | 557 | 0 | 0 | 0 |
1734880247 | 466 | 556 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)