This is the latest recevied telemetry packets stored in our database for station/object OH7RDA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TempIN* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718485923 | 17 C | 0 | 0 | 0 | 0 |
1718484383 | 18 C | 0 | 0 | 0 | 0 |
1718482844 | 18 C | 0 | 0 | 0 | 0 |
1718481306 | 19 C | 0 | 0 | 0 | 0 |
1718479766 | 19 C | 0 | 0 | 0 | 0 |
1718478227 | 20 C | 0 | 0 | 0 | 0 |
1718476688 | 20 C | 0 | 0 | 0 | 0 |
1718475149 | 20 C | 0 | 0 | 0 | 0 |
1718473609 | 21 C | 0 | 0 | 0 | 0 |
1718472070 | 22 C | 0 | 0 | 0 | 0 |
1718470531 | 23 C | 0 | 0 | 0 | 0 |
1718468992 | 24 C | 0 | 0 | 0 | 0 |
1718467453 | 24 C | 0 | 0 | 0 | 0 |
1718465914 | 24 C | 0 | 0 | 0 | 0 |
1718464375 | 26 C | 0 | 0 | 0 | 0 |
1718462836 | 26 C | 0 | 0 | 0 | 0 |
1718461297 | 26 C | 0 | 0 | 0 | 0 |
1718459757 | 26 C | 0 | 0 | 0 | 0 |
1718458218 | 26 C | 0 | 0 | 0 | 0 |
1718456679 | 27 C | 0 | 0 | 0 | 0 |
1718455141 | 26 C | 0 | 0 | 0 | 0 |
1718453601 | 26 C | 0 | 0 | 0 | 0 |
1718452061 | 25 C | 0 | 0 | 0 | 0 |
1718450523 | 24 C | 0 | 0 | 0 | 0 |
1718448984 | 24 C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
TempIN: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)