This is the latest recevied telemetry packets stored in our database for station/object W4DOD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716142894 | 419 | 631 | 0 | 0 | 0 |
1716142774 | 418 | 630 | 0 | 0 | 0 |
1716142654 | 421 | 629 | 0 | 0 | 0 |
1716142535 | 446 | 627 | 0 | 0 | 0 |
1716142415 | 413 | 625 | 0 | 0 | 0 |
1716142295 | 423 | 622 | 0 | 0 | 0 |
1716142176 | 412 | 620 | 0 | 0 | 0 |
1716132251 | 425 | 632 | 0 | 0 | 0 |
1716132132 | 424 | 631 | 0 | 0 | 0 |
1716132012 | 423 | 631 | 0 | 0 | 0 |
1716131892 | 421 | 631 | 0 | 0 | 0 |
1716131773 | 449 | 630 | 0 | 0 | 0 |
1716131653 | 447 | 629 | 0 | 0 | 0 |
1716131533 | 445 | 628 | 0 | 0 | 0 |
1716131414 | 444 | 627 | 0 | 0 | 0 |
1716131294 | 448 | 626 | 0 | 0 | 0 |
1716131055 | 446 | 621 | 0 | 0 | 0 |
1716129351 | 425 | 627 | 0 | 0 | 0 |
1716129112 | 424 | 627 | 0 | 0 | 0 |
1716128514 | 446 | 622 | 0 | 0 | 0 |
1716128394 | 459 | 620 | 0 | 0 | 0 |
1716128275 | 447 | 619 | 0 | 0 | 0 |
1716128155 | 435 | 617 | 0 | 0 | 0 |
1716128035 | 449 | 615 | 0 | 0 | 0 |
1716127916 | 450 | 612 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)