RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E22KKC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1734882126	31 Pkt	0 Pkt	-53 dBm	1.05 V
1734880300	29 Pkt	0 Pkt	-54 dBm	0.86 V
1734878474	1 Pkt	0 Pkt	-52 dBm	0.98 V
1734877991	33 Pkt	0 Pkt	-49 dBm	1.07 V
1734876165	35 Pkt	0 Pkt	-49 dBm	1.03 V
1734874338	40 Pkt	0 Pkt	-51 dBm	1.13 V
1734872511	0 Pkt	0 Pkt	-50 dBm	1.31 V
1734872140	23 Pkt	1 Pkt	-48 dBm	0.98 V
1734870314	28 Pkt	1 Pkt	-51 dBm	1.05 V
1734868488	22 Pkt	0 Pkt	-51 dBm	1.05 V
1734866661	36 Pkt	0 Pkt	-49 dBm	1.09 V
1734864835	25 Pkt	0 Pkt	-49 dBm	1.07 V
1734863009	19 Pkt	0 Pkt	-48 dBm	0.76 V
1734861183	22 Pkt	0 Pkt	-53 dBm	1.07 V
1734859357	27 Pkt	0 Pkt	-51 dBm	0.74 V
1734857530	28 Pkt	0 Pkt	-52 dBm	0.94 V
1734855704	14 Pkt	0 Pkt	-53 dBm	0.84 V
1734853878	3 Pkt	0 Pkt	-47 dBm	0.98 V
1734853505	23 Pkt	0 Pkt	-49 dBm	0.66 V
1734851679	17 Pkt	0 Pkt	-49 dBm	0.9 V
1734849853	21 Pkt	0 Pkt	-50 dBm	0.84 V
1734848027	22 Pkt	0 Pkt	-51 dBm	1.37 V
1734846201	28 Pkt	0 Pkt	-51 dBm	1.07 V
1734844376	26 Pkt	0 Pkt	-51 dBm	0.88 V
1734842550	31 Pkt	0 Pkt	-49 dBm	0.82 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)